| Customization: | Available |
|---|---|
| Occasion: | Bathroom, Garden, Playground, Spas |
| Accessory Type: | Spa Equipment |
|
Still deciding? Get samples of US$ 25/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
With over 25 years of experience, Darlly is one of the largest filtration manufacturers in the world.
Darlly offers a wide variety of pool and spa filter cartridges to be perfectly comply with your requirments.
Kindly follow us first and click "Send Inquiry". Then we can help on all the details you care.
| Darlly # | OD | Length | Top | Bottom | Replacement | Manufacturer |
| 81252M | 8-7/16"(216mm) | 19" (483mm) |
1-1/2" male slip fitting |
2-1/2" Open w/ beveled edge |
Unicel:C-8326 Filbur:FC-2780 Pleatco:PSD125-2000 |
125 sq.ft. Sundance Spas |
If you already know your filter cartridge's part number or the replacement number, you can use the search the part number on our product page to quickly confirm whether the filter is compatible.
If you do not know the replacement part number for your cartridge, then choosing the right cartridge can be accomplished by measuring your existing one. Use the following steps as a guide:
1. Measure the outside diameter of the cartridge in inches (+/- 1/16).
2. Measure cartridge length from end cap to end cap (+/- 1/16). Exclude any handles or extensions.
3. Identify the correct top and bottom type. If the top and/or bottom is open, measure the inside diameter of the opening (+/- 1/16th inch). If the end cap is closed make note of its identifying features (i.e. "Handle", "Cone", etc.).
4. Make note of the manufacturer and model number of the filter into which the replacement cartridge will be installed.
If you already know your filter cartridge's part number or the replacement number, you can use the search the part number on our product page to quickly confirm whether the filter is compatible.
If you do not know the replacement part number for your cartridge, then choosing the right cartridge can be accomplished by measuring your existing one. Use the following steps as a guide:
1. Measure the outside diameter of the cartridge in inches (+/- 1/16).
2. Measure cartridge length from end cap to end cap (+/- 1/16). Exclude any handles or extensions.
3. Identify the correct top and bottom type. If the top and/or bottom is open, measure the inside diameter of the opening (+/- 1/16th inch). If the end cap is closed make note of its identifying features (i.e. "Handle", "Cone", etc.).
4. Make note of the manufacturer and model number of the filter into which the replacement cartridge will be installed.
5. Take note whether or not there is a center core (PVC pipe in center).
Hundreds of end cap for your choice!
Engineered Full Flow CoresWelcome to customize your own filter cartrigdes!
){kind=link}